产品名称PLI-100A zebrafish microsyringe

CategoryMicroinjection

技术参数

PLI-100A斑马鱼显微注射器

适合于局部（单细胞）给药、脑室内注射给药、细胞内进行（甚至细胞核内注射）、卵母细胞内注射等。

技术参数

λ 软件驱动两种触发给药方式。
λ 给药玻璃电极可以固定在手动微操纵器上。
λ 采用毛细玻璃管进行组织、细胞内微量注射。
λ 通过简单按钮或脚踏开关施加注射，操作简单。
λ 从电极尖端灌注，防止了珍贵注射物的浪费。
λ 注射完成后，平衡气压防止细胞内容物倒吸。
λ 电极堵塞时，可通过给予高压清除。
λ 输入压力70-105psi；注射压力：0.2-60psi。
λ 注射时间：0.01-99.99s。
λ 注射容量范围：fl-μl 级。

英文：

(PLI-100A) Pico-liter Microinjector

The PLI-100A picoinjector reliably delivers injections from femtoliters to nanoliters through micropipettes by applying a regulated pressure for a digitally set period of time.

λ Femtoliter to microliter injections
λ Digital readouts for injection count, time, and pressure
λ Reliable optically encoded circuit for setting injection time
λ 5 pressures: inject, balance, clear, fill, and hold

Input Gas Pressure	75 PSI Recommended, 105 PSI Maximum
Injection Pressure	0.2 to 60 PSI (413 kPa), regulated
Balance Pressure	0.1 to 9.9 PSI (68.9 kPa) regulated, multiturn control, other ranges available on request
Fill Vacuum	Internally produced 0 to -12 PSI (0 to-82 kPa), regulated
Holding Vacuum	Internally produced 0 to -0.1 PSI (0 to -0.75 kPa), regulated
Clearing Pressure	Input gas pressure, unregulated
Injection Time	0.01 to 99.99 Seconds
Injection Time Accuracy	±0.01% (Crystal Time Base)
Duration Mode	Internally timed or externally gated
Time Trigger	Front panel, foot switch, or external TTL pulse (BNC)
Pressure Units	PSI /kPa switch selectable
Pressure Monitor Output	BNC, Rear Panel, 10 mV/PSI or 1 mV/kPa
Pressure Readout	Inject, balance, clear, output port
Pressure Display Resolution	3½ Digits, 0.1 PSI or 1 kPa
Injection Count Display	0 to 9999 Injections
Power Input	External 9VDC @ 400mA (min) Power Supply universal input 90 to 264 VAC
Weight	5.44 kg (12 lb)
Dimensions (HxWxD)	89 x 432 x 250 mm (H x W x D)
Warranty	One year, parts & labor

Product description

Parameters

产品概要

Technical Specs

PLI-100A斑马鱼显微注射器

适合于局部（单细胞）给药、脑室内注射给药、细胞内进行（甚至细胞核内注射）、卵母细胞内注射等。

PLI-100A斑马鱼显微注射器

适合于局部（单细胞）给药、脑室内注射给药、细胞内进行（甚至细胞核内注射）、卵母细胞内注射等。

技术参数

λ 软件驱动两种触发给药方式。
λ 给药玻璃电极可以固定在手动微操纵器上。
λ 采用毛细玻璃管进行组织、细胞内微量注射。
λ 通过简单按钮或脚踏开关施加注射，操作简单。
λ 从电极尖端灌注，防止了珍贵注射物的浪费。
λ 注射完成后，平衡气压防止细胞内容物倒吸。
λ 电极堵塞时，可通过给予高压清除。
λ 输入压力70-105psi；注射压力：0.2-60psi。
λ 注射时间：0.01-99.99s。
λ 注射容量范围：fl-μl 级。

英文：

(PLI-100A) Pico-liter Microinjector

The PLI-100A picoinjector reliably delivers injections from femtoliters to nanoliters through micropipettes by applying a regulated pressure for a digitally set period of time.

λ Femtoliter to microliter injections
λ Digital readouts for injection count, time, and pressure
λ Reliable optically encoded circuit for setting injection time
λ 5 pressures: inject, balance, clear, fill, and hold

Input Gas Pressure	75 PSI Recommended, 105 PSI Maximum
Injection Pressure	0.2 to 60 PSI (413 kPa), regulated
Balance Pressure	0.1 to 9.9 PSI (68.9 kPa) regulated, multiturn control, other ranges available on request
Fill Vacuum	Internally produced 0 to -12 PSI (0 to-82 kPa), regulated
Holding Vacuum	Internally produced 0 to -0.1 PSI (0 to -0.75 kPa), regulated
Clearing Pressure	Input gas pressure, unregulated
Injection Time	0.01 to 99.99 Seconds
Injection Time Accuracy	±0.01% (Crystal Time Base)
Duration Mode	Internally timed or externally gated
Time Trigger	Front panel, foot switch, or external TTL pulse (BNC)
Pressure Units	PSI /kPa switch selectable
Pressure Monitor Output	BNC, Rear Panel, 10 mV/PSI or 1 mV/kPa
Pressure Readout	Inject, balance, clear, output port
Pressure Display Resolution	3½ Digits, 0.1 PSI or 1 kPa
Injection Count Display	0 to 9999 Injections
Power Input	External 9VDC @ 400mA (min) Power Supply universal input 90 to 264 VAC
Weight	5.44 kg (12 lb)
Dimensions (HxWxD)	89 x 432 x 250 mm (H x W x D)
Warranty	One year, parts & labor

Address: Hualong building, building 3, No. 29,

North Third Ring Road, Xicheng District, Beijing

Tel：400-088-1922

Top





WeChat